Automatic throw adjustable nozzle
("Twister Nozzle " : ATTN type)
| <Features> Most suitable for the room having high ceiling and large temperature difference, such as theaters and halls. Adjust the throw automatically by built-in twister damper vanes. |
| 1.
Built-in temperature sensor works no electric
power. 2. Shorter throw when cooling, longer throw out of inner nozzle when heating can be obtained automatically. 3. Due to no chamber structure, the nozzle can be connected directly with the duct. * ATTN with much shorter
throw when cooling is also available. Consult
Kuken in case. |
|
|
Air path diagram |
|
|
During heating |
||
Automatic throw adjustable nozzle
(ATNTS type)<Features>
Most suitable for the room having high ceiling and large
temperature difference, such as theaters and halls.
Adjust the throw automatically by changing the air path.
1. Built-in temperature sensor
works no electric power.
2. Same supply air velocity as MKG nozzle when cooling,
faster velocity and longer throw when heating.
3. Equipped with chamber-box made of glass-board
contributing to acoustic absorption & heat insulation
effect.
4. Inside the nozzle are hardly seen due to the structure
of triple nozzle.
* Cooling formation : 17oC
or lower of diffusing air / Heating formation : 28oC
or above.
* The diffusing temperature should be 50oC or
below.
|
Air path diagram |
|
|
During cooling |
During heating |
|
Automatic airflow direction changeable nozzle
(ATMKG-W type)
<Features>
Round type nozzle suitable for side walls, changeable air
supply direction automatically.
1. Supply air horizontally when cooling and slant-downwards when heating to prevent unnecessary uplifting airflow.
2. Built-in temperature sensor activates inner nozzle with no electric power.
* Inner nozzle can be inclined more. Consult Kuken in case.
* Use plate shutter (PS II) for air volume control.
|
|
|
|
Airflow pattern |
|
Automatic throw
changeable linear diffuser
(ATKL type)
<Features>
Suitable for the lobby with high ceiling or ceiling of
halls. Changes the air supply path automatically by
detecting the diffusing temperature.
1. Diffuse air through whole area
when cooling, and supply air out of smaller area when
heating to have longer throw.
2. Built-in temperature sensor activates the area
controller with no electric power.
3. The face is totally identical to KL type.
|
ATKL-6 |
Air path diagram |
|
During
cooling
 |
During
heating
 |
|
Automatic airflow changeable linear diffuser
(ATVTL type)
<Features>
Sense supply air temperature and change supply air
direction automatically.
1. Built-in temperature sensor works with no electric power.
2. Supply air direction changes automatically, horizontal air supply in cooling and vertical air supply in heating.
* From #1 to #4 can be manufactured.
Automatic airflow direction
changeable grille
(ATVH type)
<Features>
Change supply air direction automatically. Suitable for
side wall at lobbies.
1. Supply air horizontally when cooling and slant-downwards when heating to prevent unnecessary uplifting airflow.
2. Built-in temperature sensor activates vanes with no electric power.
* Minimum size is 200mm for both W & H.
Automatic "Swing"
linear diffuser
<RAKK type>
<Features>
Realizes comfortablility and energy saving based on the
concept of " Air current stimulant
air-conditioning" .
1. Cyclic airflow direction change (Horizontal→Slant→Vertical→Slant→Horizontal) can be obtained.
2. Most suitable for entrance hall, shopping center and platform in subway.
* Equipped with synchronous motor (AC24V or AC100V)
Automatic "Scroll"
diffuser
(KSD type)
<Features>
New concept diffuser that scroll flow to residents
stimulates their sensible temperature.
1. Comfortable flow similar to natural wind can be gained since intermittent flow is sensed.
2. As sensible temperature is lower, room temperature can be adjusted in rather high, which contributes to energy saving.
* Equipped with synchronous motor (AC24V or AC100V)
Automatic
airflow direction changeable ceiling diffuser
(ATC type)
<Features>
Suitable supply air pattern can be gained automatically
by built-in sensor detecting the supply air temperature.
1. Built-in temperature sensor
works with no electric power.
2. Supply air pattern will be changed automatically,
horizontal in cooling and vertical in heating.
3. Totally same dimensions with standard ceiling
diffusers.
* Adopting SED air damper or SED
III is recommended for equal air supply.
* Mount inner cone firmly.
* Cooling formation : 17oC or below of
diffusing air / Heating formation : 28oC or
above.
ATC2 |
ATEP |
 Horizontal air discharge (During cooling) |
 Vertical air discharge (During heating) |